FRIGOCAM cold-room high-speed door
Roll-up high-speed door for cold rooms and freezers, down to -30 °C, during handling operations.
Reply within 48 business hours · +212 (0) 661 786 437
Description
FRIGOCAM is a roll-up high-speed door for cold-room and freezer traffic. It shortens the opening time during loading and reduces the entry of humid air. Two versions are available: down to 0 °C and down to -30 °C, the latter with heating elements around the frame and on the gear motor.
Where it is used
It is added alongside the insulated cold-room door, not instead of it. When handling stops, the cold-room door must stay closed. The allowed temperature difference is 25 °C, for example -15 °C inside and +10 °C outside, with maximum relative humidity of 30% and no condensation.
Technical characteristics
- Vertical roll-up, motor mounted on the side
- Clear width from 1,000 to 3,600 mm, height up to 4,000 mm
- Speed of 0.8 m/s, up to 2 m/s optional
- Insulated curtain of about 1,350 g/m2 down to 0 °C, and 3,150 g/m2 down to -30 °C
- Curtain range from -25 °C to +70 °C, or -35 °C to +70 °C depending on the model
- Yellow and black bottom edge and brush seals in the guides
- 0.55 kW motor with an anti-humidity kit, IP 54
- IP 56 panel, 230 V supply
Standards and installation
Photocells reverse the movement if an obstacle is detected, in line with EN 13241. Heating on the freezer model prevents the guides from icing. The PDF sheet sets the thermal limits so this high-speed door is not used as the only freezer closure.
